The Whirlpool WHAW050BW is a 5,000 BTU window air conditioner designed for cooling small rooms up to 150 square feet. It features a mechanical control system, adjustable thermostat, and multiple cooling and fan speeds to ensure comfort during hot weather. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Adjustable thermostat, multiple cooling speeds, energy saver mode, and remote control capability.
| Feature | Description |
|---|---|
| Cooling Capacity | 5,000 BTU, suitable for rooms up to 150 sq. ft. |
| Energy Efficiency Ratio (EER) | 12.1, providing efficient cooling. |
| Fan Speeds | 3 cooling and 3 fan speeds for customized comfort. |
| Remote Control | Convenient operation from a distance. |
| Filter | Washable filter for easy maintenance. |
| Noise Level | Quiet operation at 52 dB. |
| Dimensions | W: 18.5", H: 13.4", D: 15.2" |
| Weight | Approximately 50 lbs. |
Unpack and inspect contents. Ensure window type is compatible.
WARNING! Ensure the unit is securely installed to prevent accidents.
Power on the air conditioner; set the desired temperature using the thermostat.
CAUTION! Ensure the unit is level for proper operation.
Access controls via the front panel or remote. Features include temperature adjustment, fan speed selection, and mode settings.
Remote: Power, mode, fan speed, and temperature controls.
Settings: Adjust temperature, select cooling mode, and set timer for operation.
Ensure the air conditioner is properly connected to a power source.
Tip: Avoid using extension cords to prevent overheating.
To operate, power on the unit and select the desired settings.
WARNING! Do not block air intake or exhaust vents.
Regular maintenance is essential for optimal performance.
CAUTION! Always unplug the unit before cleaning.
This air conditioner complies with all applicable safety standards and regulations. For further information, visit the Whirlpool website or contact customer support.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Unit does not turn on | No power | Check power supply and ensure unit is plugged in. |
| No cooling | Incorrect settings | Ensure cooling mode is selected and thermostat is set correctly. |
| Excessive noise | Loose parts | Check for loose screws or debris in the unit. |
| Water leakage | Improper installation | Ensure unit is level and properly installed. |
Reset: Unplug the unit for a few minutes and plug it back in.
Service: For assistance, contact Whirlpool customer support.