Whirlpool WHAT102-2AW Air Conditioner Manual

The Whirlpool WHAT102-2AW is a high-efficiency air conditioner designed to provide optimal cooling for your home. This model features advanced cooling technology, multiple fan speeds, and a programmable timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Energy-efficient cooling system, remote control, adjustable thermostat, multiple fan speeds, and a programmable timer.

Feature	Description
Energy Efficiency	Designed to save on energy costs while providing effective cooling.
Remote Control	Conveniently adjust settings from anywhere in the room.
Programmable Timer	Set the air conditioner to turn on or off at specific times.
Multiple Fan Speeds	Choose from different fan speeds for customized comfort.
Adjustable Thermostat	Set your desired temperature for optimal comfort.

Installation

Unpack and inspect contents. Ensure the unit is placed on a stable surface.

Choose a suitable location: Ensure proper airflow and accessibility to power.
Install mounting brackets: Follow the included instructions for secure installation.
Connect power supply: Ensure the unit is plugged into a grounded outlet.
Test the unit: Turn on the air conditioner to ensure it operates correctly.

WARNING! Ensure all electrical connections are secure to avoid hazards.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select cooling mode: Use the remote control to choose the desired mode.
Set temperature: Adjust the thermostat to your preferred setting.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is level to avoid operational issues.

Specifications

Model: Whirlpool WHAT102-2AW.
Cooling Capacity: 10,000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Power Supply: 115V, 60Hz.
Dimensions: 24 x 20 x 15 inches.
Weight: 75 lbs.
Noise Level: 50 dB (low setting).

Controls and Settings

Access settings via the remote control or the unit's control panel. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: POWER, MODE, FAN, TEMP UP/DOWN, TIMER.

Adjust settings for optimal cooling performance and energy efficiency.

Connecting Devices

Ensure the air conditioner is properly connected to a power source. Use the remote control for operation.

Turn off the unit before connecting any devices.
Ensure all connections are secure and properly matched.

Tip: Regularly check connections for safety and efficiency.

Operating the Air Conditioner

Follow these steps to operate your air conditioner effectively:

Turn on the unit using the POWER button.
Select the desired cooling mode and temperature.
Adjust fan speed as needed for comfort.
Use the timer function for scheduled operation.

WARNING! Do not block airflow; ensure vents are clear.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filters and check for blockages.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit the Whirlpool website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power supply	Check power connection and outlet.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Excessive noise	Loose parts	Check for loose components and tighten if necessary.
Water leakage	Blocked drain	Clear any blockages in the drainage system.

Reset: Unplug the unit for 5 minutes to reset.

Service: Contact Whirlpool customer service for further assistance.