Whirlpool PACW29CO Air Conditioner Manual

The Whirlpool PACW29CO is a portable air conditioner designed to provide efficient cooling for rooms up to 300 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidification settings. The unit is equipped with a remote control, programmable timer, and a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow to your preference
Built-in Dehumidifier	Reduces humidity for added comfort

Installation

Unpack the air conditioner and inspect for any damage. Place the unit in a suitable location near a window.

Install the window kit: Follow the instructions to secure the window panel.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit and follow the on-screen prompts to set up your preferences.

Select cooling mode: Choose between cool, fan, or dehumidify.
Set the temperature: Use the remote or control panel to adjust the thermostat.
Program the timer: Set the unit to turn on or off at specific times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Power Consumption: 115V, 60Hz.
Air Flow Rate: 300 CFM.
Noise Level: 52 dB.
Weight: 70 lbs.
Dimensions: 18 x 15 x 30 inches.
Refrigerant: R410A.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: Power, temperature controls, mode selection, and timer settings.

Connecting Devices

Ensure the air conditioner is connected to a power source and the exhaust hose is properly installed.

Turn off the unit before making any connections.
Ensure all connections are secure and leak-free.

Tip: Regularly check the exhaust hose for blockages.

Operating the Air Conditioner

To operate, select your desired mode and temperature using the remote or control panel.

Press the power button to turn on the unit.
Select the cooling mode and adjust the temperature.
Use the fan speed settings to customize airflow.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The air conditioner includes easy-to-read controls and a remote for convenient operation.

Care & Cleaning

Unplug the unit before cleaning. Use a soft cloth to wipe the exterior and clean the filter regularly.

CAUTION! Do not use harsh chemicals or abrasive materials.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.whirlpool.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Incorrect settings	Check mode and temperature settings.
Water leakage	Clogged drain	Inspect and clear the drain line.
Remote not working	Batteries	Replace batteries in the remote.
Unit making noise	Loose parts	Check for loose components and tighten.

Reset: Unplug the unit for 10 seconds to reset.

Service: 1-800-253-1301; www.whirlpool.com