Whirlpool PACW212HP Air Conditioner Manual

The Whirlpool PACW212HP is a portable air conditioner designed to provide efficient cooling for rooms up to 500 square feet. It features a dual hose system for improved cooling efficiency, a programmable thermostat, and multiple fan speeds. The unit also includes a remote control for convenient operation, a dehumidification mode, and an easy-to-install window kit. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual hose system, Remote Control, Programmable thermostat, Multiple fan speeds, Dehumidification mode.

Feature	Description
Dual hose system	Improves cooling efficiency by drawing in air from outside.
Remote control	Allows for easy operation from a distance.
Programmable thermostat	Set desired temperature for automatic cooling.
Multiple fan speeds	Customize airflow for comfort.
Dehumidification mode	Reduces humidity levels in the room.
Window kit	Easy installation for venting hot air outside.

Installation

Unpack and inspect contents. Place the unit on a stable surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hoses: Attach the hoses to the unit and the window kit.
Plug into AC power: Ensure the outlet is suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure during installation to avoid tipping.

First-Time Setup

Power on the unit; follow the remote control instructions.

Set the desired temperature using the remote control.
Select fan speed: Choose from low, medium, or high.
Activate dehumidification mode if needed.

CAUTION! Ensure the unit is properly vented to avoid overheating.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 500 square feet.
Power Supply: 115V, 60Hz.
Noise Level: 52 dB (low speed).
Weight: 70 lbs.
Dimensions: 15 x 18 x 30 inches.
Energy Efficiency Ratio (EER): 10.8.

Controls and Settings

Access settings via the remote control or control panel on the unit. Controls include: Power, Temperature setting, Fan speed, Mode selection (Cool, Fan, Dehumidify).

Connecting Devices

Ensure the unit is properly connected to the power supply and the window kit is installed correctly.

Turn off the unit before making any adjustments.
Check all connections for secure fit.

Tip: Use a surge protector to safeguard the unit from power surges.

Operating the Air Conditioner

To operate, use the remote control or the control panel. Adjust temperature, fan speed, and mode as needed.

Press the power button to turn on the unit.
Set the desired temperature and fan speed.
Monitor the room temperature and adjust settings as necessary.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and check for any blockages in the hoses.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards. For more information, visit the Whirlpool website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect settings	Ensure unit is set to cooling mode and temperature is set low enough.
Excessive noise	Blocked air intake	Check for obstructions and clean the air filter.
Water leakage	Improper installation	Ensure window kit is sealed properly.

Service: For further assistance, contact Whirlpool customer support.