Whirlpool ATR1555SPP Air Conditioner Manual

The Whirlpool ATR1555SPP is a portable air conditioner designed to provide efficient cooling for rooms up to 400 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidification settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting the Unit 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Fan Speeds	Customize airflow to your preference
Built-in Dehumidifier	Reduces humidity levels for comfort

Installation

Unpack the unit and inspect for any damage. Place the air conditioner on a flat, stable surface near a window.

Install the window kit: Follow the instructions to secure the window panel.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into a power outlet: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure proper ventilation and avoid blocking airflow.

First-Time Setup

Power on the unit and follow the on-screen prompts to set your preferences.

Select cooling mode: Choose between cool, fan, or dehumidify.
Set the temperature: Use the remote or control panel to adjust.
Adjust fan speed: Select low, medium, or high based on your comfort.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 15,000 BTU.
Power Consumption: 1250 watts.
Noise Level: 52 dB.
Air Flow Rate: 400 CFM.
Weight: 70 lbs.
Dimensions: 18 x 15 x 30 inches.
Power Supply: 115V, 60Hz.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: POWER, MODE, TEMP, FAN, TIMER.

Settings: Adjust temperature, set timer for automatic shut-off, and switch between modes.

Connecting the Unit

Ensure the air conditioner is properly connected to the window kit and power supply.

Turn off the unit before connecting or disconnecting.
Ensure the exhaust hose is securely attached.
Check for any leaks in the window installation.

Tip: Regularly check connections for optimal performance.

Operating the Air Conditioner

To operate, press the POWER button and select your desired mode and temperature.

Press POWER to turn on.
Select the cooling mode.
Adjust the temperature and fan speed as needed.
Use the timer function for automatic shut-off.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter monthly and check for any blockages.

CAUTION! Always unplug the unit before cleaning.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.whirlpool.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect settings	Ensure the unit is set to cool mode.
Excessive noise	Improper installation	Check for secure installation and blockages.
Water leakage	Full water tank	Empty the water tank and check for clogs.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-253-1301; www.whirlpool.com