Whirlpool ATR1253SPP Air Conditioner Manual

The Whirlpool ATR1253SPP is a portable air conditioner designed for efficient cooling and dehumidification. It features a sleek design, easy-to-use controls, and multiple fan speeds to ensure comfort in various environments. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable Design	Easy to move and set up in any room.
Remote Control	Convenient operation from a distance.
Adjustable Thermostat	Customize your comfort level.
Multiple Fan Speeds	Choose your preferred airflow.
Built-in Dehumidifier	Reduces humidity for added comfort.

Installation

Unpack and inspect contents. Place the unit on a flat, stable surface near a window.

Attach the exhaust hose to the unit and the window kit.
Ensure the window kit fits securely in the window.
Plug the unit into a grounded outlet.
Turn on the unit and set your desired temperature.

WARNING! Ensure proper ventilation and avoid blocking air intake.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select cooling mode: Press the mode button until the desired mode is displayed.
Set the temperature: Use the up/down arrows to adjust.
Choose fan speed: Press the fan button to cycle through options.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Power Consumption: 1150 Watts.
Noise Level: 52 dB.
Air Flow Rate: 300 CFM.
Refrigerant: R410A.
Weight: 70 lbs.
Dimensions: 30 x 18 x 15 inches.

Controls and Settings

Access controls via the front panel or remote. Features include power, mode selection, temperature adjustment, and fan speed settings.

Remote: Power, mode, temperature, fan speed, and timer settings.

Connecting Devices

Ensure the air conditioner is connected to a power source and properly installed in the window.

Check all connections before powering on the unit.
Use the remote control for easy operation.

Tip: Keep the remote within range for optimal performance.

Operating the Air Conditioner

To operate, select the desired mode and temperature using the controls.

Press the power button to turn on the unit.
Select cooling mode and adjust the temperature.
Monitor the room temperature and adjust settings as needed.

WARNING! Do not block air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance.

CAUTION! Always unplug the unit before cleaning.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure cooling mode is selected.
Excessive noise	Improper installation	Check for loose parts or obstructions.
Water leakage	Clogged drain	Inspect and clear the drain line.

Service: For further assistance, contact Whirlpool customer service.