Whirlpool ACPE102PS Air Conditioner Manual

The Whirlpool ACPE102PS is a portable air conditioner designed to provide efficient cooling for rooms up to 350 square feet. It features a sleek design, easy-to-use controls, and multiple cooling settings. This manual provides essential information regarding safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a dehumidifier function.

Feature	Description
Portable Design	Easy to move from room to room.
Remote Control	Convenient operation from a distance.
Adjustable Thermostat	Set your desired temperature easily.
Multiple Fan Speeds	Customize airflow to your preference.
Dehumidifier Function	Reduces humidity levels in the room.

Installation

Unpack the air conditioner and inspect for any damage. Place the unit in a suitable location near a window.

Attach the window kit according to the instructions provided.
Ensure the unit is level and stable.
Plug the unit into a grounded outlet.
Turn on the unit and select your desired settings.

WARNING! Ensure proper ventilation and avoid blocking air intake or exhaust.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts to set your preferences.

Select cooling mode: Press the mode button until the desired mode is displayed.
Set the temperature: Use the up/down buttons to adjust the temperature.
Adjust fan speed: Choose from low, medium, or high settings.

CAUTION! Ensure the unit is properly installed before operating.

Specifications

Cooling Capacity: 10,000 BTU.
Power Supply: 115V/60Hz.
Air Flow: 300 CFM.
Noise Level: 52 dB.
Weight: 70 lbs.
Dimensions: 30 x 18 x 15 inches.
Energy Efficiency Ratio: 12.0 EER.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: Power, Mode, Temperature, Fan Speed, Timer.

Settings include cooling, fan, and dehumidify modes. Use the timer function to schedule operation.

Connecting to Power

Ensure the air conditioner is plugged into a dedicated outlet. Avoid using extension cords.

Check the power supply voltage matches the unit's requirements.
Ensure the outlet is grounded.
Do not overload the circuit.

Tip: Use a surge protector for added safety.

Operating the Air Conditioner

To operate, select your desired mode and temperature. The unit will automatically adjust to maintain the set temperature.

Press the power button to turn on the unit.
Select cooling or fan mode as needed.
Adjust the temperature and fan speed to your preference.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filters and check for blockages.

CAUTION! Unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.whirlpool.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Incorrect settings	Check mode and temperature settings.
Strange noise	Loose parts	Inspect for loose components.
Water leakage	Blocked drain	Clear any blockages in the drain.
Remote not working	Dead batteries	Replace batteries in the remote.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-253-1301; www.whirlpool.com