Whirlpool ACP122GPW1 Air Conditioner Manual

The Whirlpool ACP122GPW1 is a 12,000 BTU portable air conditioner designed to cool rooms up to 400 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidification settings. This unit is equipped with a remote control, programmable timer, and a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 12,000 BTU cooling capacity, remote control, programmable timer, washable filter, and multiple fan speeds.

Feature	Description
Cooling Capacity	12,000 BTU, suitable for rooms up to 400 sq. ft.
Remote Control	Convenient control from a distance.
Programmable Timer	Set the unit to turn on or off at specific times.
Washable Filter	Easy to clean and maintain for optimal performance.
Multiple Fan Speeds	Customize airflow with low, medium, and high settings.

Installation

Unpack the air conditioner and inspect for any damage. Follow these steps for installation:

Choose a suitable location near a window for exhaust.
Install the window kit according to the included instructions.
Connect the exhaust hose to the unit and the window kit.
Plug the unit into a grounded outlet.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select cooling mode: Press the mode button to choose between cool, fan, and dehumidify.
Set desired temperature using the temperature controls.
Adjust fan speed for optimal comfort.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 400 sq. ft.
Power Supply: 115V, 60Hz.
Energy Efficiency Ratio (EER): 12.0.
Noise Level: 52 dB (low speed).
Weight: 70 lbs.
Dimensions: 30" H x 18" W x 15" D.

Controls and Settings

Access controls via the front panel or remote. Key functions include:

Modes: Cool, Fan, Dehumidify.

Temperature Control: Set desired temperature using the up/down buttons.

Fan Speed: Choose between low, medium, and high settings.

Connecting to Power

Ensure the air conditioner is connected to a properly grounded outlet. Avoid using extension cords.

Check the power supply voltage matches the unit's requirements.
Plug the unit directly into the wall outlet.

Tip: Use a surge protector for added safety.

Operating the Air Conditioner

To operate the air conditioner:

Press the power button to turn on the unit.
Select your desired mode and temperature.
Adjust the fan speed as needed.
Use the timer function to schedule operation times.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Clean or replace the filter every month.
Wipe down the exterior with a damp cloth.
Check for any blockages in the air intake and exhaust.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Blocked air intake	Check for obstructions and clean filter.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Service: For further assistance, contact Whirlpool customer service.