Whirlpool ACP102PS2 Air Conditioner Manual

The Whirlpool ACP102PS2 is a portable air conditioner designed to provide efficient cooling for rooms up to 350 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidification settings. The unit is equipped with a remote control, programmable timer, and a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Cleaning 9. Troubleshooting 10. Regulatory Information

Features at a Glance

Key components: Portable design, remote control, programmable timer, washable filter, multiple cooling modes.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off automatically
Washable Filter	Easy to clean and maintain
Multiple Cooling Modes	Cool, fan, and dehumidification options

Installation

Unpack and inspect contents. Place the unit in a suitable location.

Attach the exhaust hose: Connect the hose to the back of the unit and the window kit.
Plug into a power outlet: Ensure the outlet is suitable for the unit's power requirements.
Secure the window kit: Adjust the kit to fit your window size and secure it in place.

WARNING! Ensure the unit is stable and all connections are secure to avoid leaks.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Select cooling mode: Use the mode button to choose between cool, fan, and dehumidify.
Set desired temperature: Adjust the temperature using the up/down buttons.
Program timer: Set the timer for automatic operation if desired.

CAUTION! Ensure the unit is placed on a flat surface for optimal performance.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 350 sq. ft.
Power Supply: 115V, 60Hz.
Air Flow: 300 CFM.
Noise Level: 52 dB.
Weight: 70 lbs.
Dimensions: 30" H x 18" W x 15" D.

Controls and Settings

Access controls via the front panel or remote. Features include power, mode selection, temperature adjustment, and fan speed settings.

Remote: Power, mode, temperature, fan speed, timer.

Settings: Adjust temperature, set timer, and switch modes easily.

Connecting to Power

Ensure the unit is plugged into a dedicated outlet. Avoid using extension cords.

Check voltage: Ensure the outlet matches the unit's power requirements.
Plug in the unit: Insert the plug firmly into the outlet.
Turn on the unit: Use the power button on the unit or remote.

Tip: Use a surge protector to safeguard the unit from power surges.

Operating the Air Conditioner

To operate, select the desired mode and temperature.

Press the power button to turn on the unit.
Select cooling mode: Choose between cool, fan, or dehumidify.
Adjust temperature: Use the up/down buttons to set your desired temperature.
Set fan speed: Choose low, medium, or high fan speed as needed.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Cleaning

Regular maintenance is essential for optimal performance.

Clean the filter: Remove and wash the filter every month.
Check the exhaust hose: Ensure it is free from obstructions.
Wipe the exterior: Use a damp cloth to clean the unit's surface.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect settings	Ensure the unit is set to cool mode and temperature is set correctly.
Excessive noise	Obstruction	Check for any objects blocking the air intake or exhaust.
Water leakage	Full tank	Empty the water tank and ensure proper drainage.

Service: For further assistance, contact Whirlpool customer service.