Whirlpool ACP102PR Air Conditioner Manual

The Whirlpool ACP102PR is a portable air conditioner designed to provide efficient cooling for rooms up to 350 square feet. It features a 3-in-1 functionality, offering cooling, fan, and dehumidification modes. The unit is equipped with a remote control, programmable timer, and adjustable thermostat for optimal comfort. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, programmable timer, and multiple cooling modes.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Customizable temperature settings
Programmable Timer	Set on/off times for energy efficiency
Multiple Cooling Modes	Cooling, fan, and dehumidification options

Installation

Unpack and inspect contents. Place the unit on a flat surface near a window.

Install the window kit: Follow instructions to secure the exhaust hose.
Connect the exhaust hose: Attach to the back of the unit and window kit.
Plug into a power outlet: Ensure the outlet is grounded.

WARNING! Ensure proper ventilation and avoid blocking air intake.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Press the mode button to choose.
Set desired temperature: Use the up/down buttons on the remote.
Adjust fan speed: Select low, medium, or high as needed.

CAUTION! Ensure the unit is level for optimal performance.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 350 sq. ft.
Power Supply: 115V/60Hz.
Noise Level: 52 dB.
Weight: 65 lbs.
Dimensions: 30" H x 18" W x 15" D.
Energy Efficiency Ratio: 12.0 EER.

Controls and Settings

Access settings via the remote control or control panel on the unit. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: Power, Mode, Temperature, Fan Speed, Timer.

Adjust settings for optimal comfort and energy efficiency.

Connecting to Power

Ensure the unit is plugged into a grounded outlet. Avoid using extension cords.

Check voltage: Ensure it matches the unit's specifications.
Plug in the unit: Use a dedicated outlet for best performance.

Tip: Use a surge protector for added safety.

Operating the Air Conditioner

Follow the remote control instructions for operation.

Turn on the unit: Press the power button.
Select cooling mode: Choose from cooling, fan, or dehumidification.
Adjust temperature and fan speed as needed.
Monitor the water level: Empty the tank if necessary.

WARNING! Do not block air intake or exhaust vents.

Accessibility Features

The unit is designed for ease of use, featuring a remote control and clearly labeled buttons for accessibility.

Care & Cleaning

Unplug the unit before cleaning. Use a soft, dry cloth to clean the exterior.

CAUTION! Do not use harsh chemicals or liquids.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.whirlpool.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unit not plugged in	Check power connection and outlet.
Not cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set low enough.
Water leaking	Full water tank	Empty the water tank and check for blockages.
Noise during operation	Improper placement	Ensure unit is on a flat surface and not touching walls.

Reset: Unplug for 5 minutes and plug back in to reset.

Service: 1-800-253-1301; www.whirlpool.com